GONG REPAIR

Posted on November 24, 2014 by Dave T

GONG REPAIR
Coil gongs can be repaired . No need to solder them. Solder will not work unless
you have the skill to work with metals this way.Soft solder will not work. Press a b;ushing
in the old hole , the press-fit the gong back in. Carefully clamp the gong ind in the vise and
tap the black in. This will work if the gong end is properly sized to fit tightly in the
bushing.

This entry was posted in Clock repair, specific clock repair techniques. Bookmark the permalink.