-
Recent Posts
Archives
Categories
Meta
Monthly Archives: September 2014
Seth Thomas 124 (repair notes)
Seth Thomas 124 : Rack return spring : .010in. / Suspension spring thickness: .001in. .900in. long , .190in. wide. Hammer return spring: .016in. strong, trip lever return spring: .010in. inside plate , .013 outside plate. Regulation on the Seth Thomas … Continue reading
Posted in Clock repair
Comments Off on Seth Thomas 124 (repair notes)
New Haven beehive style “Petite”
New Haven: Small beehive style mantle with a round mechanism (spring drive) 8 day the information on the inside back gives regulation parameters. The name of the clock is the Petite. Regulator: ¼ turn = 1 minute in 24 hours. … Continue reading
Posted in Clock repair
2 Comments
Waterbury triple plate chime mechanism
Waterbury triple plate westminster chime mechanism: mainspring specs: Time mainspring: .018in. X .750in. X 96in. Strike mainspring: .014in. X .750in. X 96in. Chime mainspring: .0225in. X .874in. X 78in. At this time there is no replacement available for the chime … Continue reading
Posted in Clock repair
Comments Off on Waterbury triple plate chime mechanism
Seth Thomas # 113 A
Technical information about the Seth Thomas #113A mechanism.The mechanism plays the westminster chime on a set of 5 rods friction fit into a gong block that says Mayland NY USA on it . The rods are a steel color and … Continue reading
Posted in Clock repair
Comments Off on Seth Thomas # 113 A
Kundo Electronic clock
KUNDO ELECTRONIC: The Kundo ELECTRONIC clock ( made by Kieninger and Obergfell in Germany ) uses a 1.5 volt power source. The blue wire is to be hooked to the negative and the red wire should be hooked to the … Continue reading
Posted in Clock repair
Comments Off on Kundo Electronic clock
Seth Thomas Sonora chime (dual chime)
The sonora chime by Seth Thomas that has dual chimes (whittington and westminster ) has 2 small dials about 1 ½ inches in diameter on the top of the face . One of them is for the chime selection and … Continue reading
Posted in Clock repair
Comments Off on Seth Thomas Sonora chime (dual chime)
Seth Thomas “Eight Day Half Hour Strike”
Seth Thomas clock that has paper in the back that says Eight Day Half Hour Strike . Has 5 7/8 ½ stamped on the movement plate (lower strike side) . The strike mainspring and the time mainspring are the same. … Continue reading
Posted in Clock repair
Comments Off on Seth Thomas “Eight Day Half Hour Strike”
Seth Thomas T&S with “fishing picture” on the glass
Seth Thomas time and strike Mantle clock with fishing scene on the glass (silver color). Has 5 7/8 stamped on the movement . Made in Thomaston Ct. Has the Seth Thomas emblem stamped on the plate immediately below the suspension … Continue reading
Posted in Clock repair
Comments Off on Seth Thomas T&S with “fishing picture” on the glass
Jacques 7 melody grandfather clock
Very large grandfather clock called Jacques named after the designer Charles Jacques . The mechanism was made in Europe and the rest of the clock was made in America. This particular model has seven melodies ; one for each day … Continue reading
Posted in Clock repair
Comments Off on Jacques 7 melody grandfather clock
Waterbury Walnut regulator #9
Waterbury LARGE time only with second hand . Called the walnut regulator #9. The suspension is .0025 inches strong. The distance between the pins on the suspension is very critical because of the way the pendulum hooks on to the … Continue reading
Posted in Clock repair
Comments Off on Waterbury Walnut regulator #9